From 04f192bf9da26bd6fbed506a2cbb2a10dda25d35 Mon Sep 17 00:00:00 2001 From: minima Date: Sat, 2 Sep 2000 17:13:19 +0000 Subject: [PATCH] added new version of admin manual --- Changes | 1 + html/adminmanual-1.html | 7 ++-- html/adminmanual-5.html | 21 ++++++++++ html/adminmanual-8.html | 85 +++++++++++++++++++++++++++-------------- html/adminmanual.html | 62 ++++++++++++++++-------------- 5 files changed, 116 insertions(+), 60 deletions(-) diff --git a/Changes b/Changes index 7d534247..3a2a8759 100644 --- a/Changes +++ b/Changes @@ -7,6 +7,7 @@ ignored. PC10, PC11, PC12 with words contained in this file will not be sent on. Also ann, talk and dx commands have badword checking added. Words are NOT case sensitive, but you will need to put all the endings in (eg ...k, ...ker, ...king). +3. Added new version of admin manual from G0VGS. 01Sep00======================================================================= 1. allow blank on field 4 of PC10 (even though it's "illegal"). 28Aug00======================================================================= diff --git a/html/adminmanual-1.html b/html/adminmanual-1.html index af89866e..3e247fc2 100644 --- a/html/adminmanual-1.html +++ b/html/adminmanual-1.html @@ -14,7 +14,7 @@ Previous

1. Installation (Original version by Iain Phillips, G0RDI)

-

Last modified: 8 August 2000 by Ian Maude, G0VGS +

Last modified: 1 September 2000 by Ian Maude, G0VGS

1.1 Introduction

@@ -39,10 +39,11 @@ Previous
  • Data-Dumper-2.10.tar.gz
  • FreezeThaw-0.3.tar.gz
  • MLDBM-2.00.tar.gz
  • -
  • TimeDate-1.8.tar.gz
  • +
  • TimeDate-1.08.tar.gz
  • IO-1.20.tar.gz
  • Net-Telnet-3.02.tar.gz
  • -
  • Curses-1.02.tar.gz +
  • Curses-1.05.tar.gz
  • +
  • Time-HiRes-01.20.tar.gz
  • diff --git a/html/adminmanual-5.html b/html/adminmanual-5.html index 728ea821..3facea56 100644 --- a/html/adminmanual-5.html +++ b/html/adminmanual-5.html @@ -285,6 +285,27 @@ package DXProt;

    Again, this is simply a list of names we do not want to see in the spotted field of a DX callout.

    +

    5.6 Filtering words from text fields in Announce, Talk and DX spots +

    + +

    Create a file in /spider/data called badwords. The format is quite +simple. Lines beginning with # are ignored so comments can be added. An +example file is below ... +

    +

    +
    +# Below is a list of words we do not wish to see on the cluster
    +grunge grunged grunging
    +splodge splodger splodging
    +grince
    +fluffle
    +
    +
    +

    Multiple words can be used on the same line as shown. Obviously these +are just examples :-) +

    +

    You can reload the file from the cluster prompt as sysop with load/badwords. +


    Next Previous diff --git a/html/adminmanual-8.html b/html/adminmanual-8.html index 4d5450a1..2747eedf 100644 --- a/html/adminmanual-8.html +++ b/html/adminmanual-8.html @@ -218,7 +218,36 @@ will be deleted. Beware! do this if you change this file whilst the cluster is running in order for the changes to take effect.

    -

    8.16 load/bands (9) +

    8.16 load/baddx (9) +load/baddx Reload the bad DX table

    + +

    Reload the /spider/data/baddx.pl file if you have changed it manually whilst +the cluster is running. This table contains the DX Calls that, if spotted, +will not be passed on. FR0G and TEST are classic examples. +

    +

    8.17 load/badmsg (9) +

    + +

    load/badmsg Reload the bad message table +

    +

    Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst +the cluster is running. This table contains a number of perl regular +expressions which are searched for in the fields targetted of each message. +If any of them match then that message is immediately deleted on receipt. +

    +

    8.18 load/badwords (9) +

    + +

    load/badwords Reload the badwords file +

    +

    Reload the /spider/data/badwords file if you have changed it manually whilst +the cluster is running. This file contains a list of words which, if found +on certain text portions of PC protocol, will cause those protocol frames +to be rejected. It will all put out a message if any of these words are +used on the announce, dx and talk commands. The words can be one or +more on a line, lines starting with '#' are ignored. +

    +

    8.19 load/bands (9)

    load/bands Reload the band limits table @@ -226,7 +255,7 @@ changes to take effect.

    Reload the /spider/data/bands.pl file if you have changed it manually whilst the cluster is running.

    -

    8.17 load/cmd_cache (9) +

    8.20 load/cmd_cache (9)

    load/cmd_cache Reload the automatic command cache @@ -237,14 +266,14 @@ if you are doing a lot of moving commands about or delete a command in the local_cmd tree and want to use the normal one again. Execute this command to reset everything back to the state it was just after a cluster restart.

    -

    8.18 load/forward (9) +

    8.21 load/forward (9)

    load/forward Reload the msg forwarding routing table

    Reload the /spider/msg/forward.pl file if you have changed it manually whilst the cluster is running.

    -

    8.19 load/messages (9) +

    8.22 load/messages (9)

    load/messages Reload the system messages file @@ -254,7 +283,7 @@ commands) you can have them take effect during a cluster session by executing th command. You need to do this if get something like :-

    unknown message 'xxxx' in lang 'en'

    -

    8.20 load/prefixes (9) +

    8.23 load/prefixes (9)

    load/prefixes Reload the prefix table @@ -262,7 +291,7 @@ command. You need to do this if get something like :-

    Reload the /spider/data/prefix_data.pl file if you have changed it manually whilst the cluster is running.

    -

    8.21 merge (5) +

    8.24 merge (5)

    merge <node> [<no spots>/<no wwv>] Ask for the latest spots and WWV @@ -274,7 +303,7 @@ node must be connected locally. to your databases they will not duplicate any that have recently been added (the last 2 days for spots and last month for WWV data).

    -

    8.22 msg (9) +

    8.25 msg (9)

    msg <cmd> <msgno> [data ...] Alter various message parameters @@ -305,7 +334,7 @@ out.

    STAT/MSG <msgno>

    This will display more information on the message than DIR does.

    -

    8.23 pc (8) +

    8.26 pc (8)

    pc <call> <text> Send text (eg PC Protocol) to <call> @@ -318,7 +347,7 @@ arise (messages get stuck etc). eg:- without any processing, added of "from <blah> to <blah>" or whatever.

    pc G1TLH Try doing that properly!!!

    -

    8.24 ping (1) +

    8.27 ping (1)

    ping <node> Send a ping command to another cluster node @@ -328,7 +357,7 @@ The time returned is the length of time taken for a PC51 to go to another cluster and be returned.

    Any visible cluster node can be PINGed.

    -

    8.25 rcmd (1) +

    8.28 rcmd (1)

    rcmd <node call> <cmd> Send a command to another DX cluster @@ -340,21 +369,21 @@ that the node callsign of this cluster is in fact a node b) whether the other system is allowing RCMDs from this node and c) whether you have permission to send this command at all.

    -

    8.26 read (5) +

    8.29 read (5)

    read <msgno> Read a message on the system

    As a sysop you may read any message on the system

    -

    8.27 set/debug (9) +

    8.30 set/debug (9)

    set/debug <name> Add a debug level to the debug set

    You can remove this level with unset/debug <name>

    -

    8.28 set/isolate (9) +

    8.31 set/isolate (9)

    set/isolate <node call> Isolate a node from the rest of the network @@ -366,7 +395,7 @@ out from it nor goes back into from the rest of the nodes connected to you.

    You can see which nodes are isolated with the show/isolate (1) command.

    You can remove the isolation with the command unset/isolate.

    -

    8.29 set/sys_location (9) +

    8.32 set/sys_location (9)

    set/sys_location <lat & long> Set your cluster latitude and longitude @@ -376,7 +405,7 @@ what your latitude and longitude is. If you have not yet done a SET/QRA then this command will set your QRA locator for you. For example:-

    SET/LOCATION 52 22 N 0 57 E

    -

    8.30 set/lockout (9) +

    8.33 set/lockout (9)

    set/lockout <call> Stop a callsign connecting to the cluster @@ -384,7 +413,7 @@ then this command will set your QRA locator for you. For example:-

    You can show who is locked out with the show/lockout (9) command.

    To allow the user to connect again, use the command unset/lockout

    -

    8.31 set/node (9) +

    8.34 set/node (9)

    set/node <call> [<call> ...] Make the callsign an AK1A cluster @@ -401,7 +430,7 @@ set/arcluster

    To see what your nodes are set to, use the show/nodes command.

    -

    8.32 set/obscount (9) +

    8.35 set/obscount (9)

    set/obscount <count> <node call> Set the 'pump-up' obscelence counter @@ -418,7 +447,7 @@ what would be the third attempt, that node is disconnected. default values, if a node has not responded to a ping within 15 minutes, it is disconnected.

    -

    8.33 set/pinginterval (9) +

    8.36 set/pinginterval (9)

    set/pinginterval <time> <node call> Set the ping time to neighbouring nodes @@ -433,7 +462,7 @@ for numbers greater than that. (as certain cluster software doesn't always notice), see SET/OBSCOUNT for more information.

    -

    8.34 set/privilege (9) +

    8.37 set/privilege (9)

    set/privilege <n> <call> [<call> ...] Set the privilege level on a call @@ -455,7 +484,7 @@ to commands are as default:-

    If you are a sysop and you come in as a normal user on a remote connection your privilege will automatically be set to 0.

    -

    8.35 set/password (9) +

    8.38 set/password (9)

    set/password <callsign> <string> Set a users password @@ -466,12 +495,12 @@ spaces - but they won't appear in the password). You can see the result with STAT/USER. The password is the usual 30 character baycom type password.

    -

    8.36 set/sys_qra (9) +

    8.39 set/sys_qra (9)

    set/sys_qra <locator> Set your cluster QRA locator

    -

    8.37 show program (5) +

    8.40 show program (5)

    show/program Show the locations of all the included program modules @@ -479,7 +508,7 @@ type password.

    Show the name and location where every program module was load from. This is useful for checking where you think you have loaded a .pm file from.

    -

    8.38 shutdown (5) +

    8.41 shutdown (5)

    shutdown Shutdown the cluster @@ -487,7 +516,7 @@ is useful for checking where you think you have loaded a .pm file from.

    Shutdown the cluster and disconnect all the users. If you have Spider set to respawn in /etc/inittab it will of course restart.

    -

    8.39 spoof (9) +

    8.42 spoof (9)

    spoof <callsign> <command> Run commands as another user @@ -497,7 +526,7 @@ issue commands as if you were a different user. This is very useful for the kind of things that users seem to always get wrong.. like home_node for example.

    -

    8.40 stat/db (5) +

    8.43 stat/db (5)

    stat/db <dbname> Show the status of a database @@ -506,7 +535,7 @@ example.

    Depending on your privilege level you will see more or less information. This command is unlikely to be of much use to anyone other than a sysop.

    -

    8.41 stat/channel (5) +

    8.44 stat/channel (5)

    stat/channel <callsign> Show the status of a channel on the cluster @@ -515,7 +544,7 @@ This command is unlikely to be of much use to anyone other than a sysop. you are on or else for the callsign that you asked for.

    Only the fields that are defined (in perl term) will be displayed.

    -

    8.42 stat/msg (5) +

    8.45 stat/msg (5)

    stat/msg <msgno> Show the status of a message @@ -523,7 +552,7 @@ you are on or else for the callsign that you asked for.

    This command shows the internal status of a message and includes information such as to whom it has been forwarded, its size, origin etc etc.

    -

    8.43 stat/user (5) +

    8.46 stat/user (5)

    stat/user <callsign> Show the full status of a user diff --git a/html/adminmanual.html b/html/adminmanual.html index f72601f9..d69cd1ae 100644 --- a/html/adminmanual.html +++ b/html/adminmanual.html @@ -14,7 +14,7 @@ Contents


    The DXSpider Installation and Administration Manual

    -

    Ian Maude, G0VGS, (ianmaude@btinternet.com)

    Version 1.25 August 2000 +

    Ian Maude, G0VGS, (ianmaude@btinternet.com)

    Version 1.26 September 2000


    A reference for SysOps of the DXSpider DXCluster program.
    @@ -56,6 +56,7 @@ Contents
  • 5.3 WWV
  • 5.4 Filtering Mail
  • 5.5 Filtering DX callouts +
  • 5.6 Filtering words from text fields in Announce, Talk and DX spots

    6. Information, files and useful programs

    @@ -91,34 +92,37 @@ Contents
  • 8.13 kill (5)
  • 8.14 kill full (5)
  • 8.15 load/aliases (9) -
  • 8.16 load/bands (9) -
  • 8.17 load/cmd_cache (9) -
  • 8.18 load/forward (9) -
  • 8.19 load/messages (9) -
  • 8.20 load/prefixes (9) -
  • 8.21 merge (5) -
  • 8.22 msg (9) -
  • 8.23 pc (8) -
  • 8.24 ping (1) -
  • 8.25 rcmd (1) -
  • 8.26 read (5) -
  • 8.27 set/debug (9) -
  • 8.28 set/isolate (9) -
  • 8.29 set/sys_location (9) -
  • 8.30 set/lockout (9) -
  • 8.31 set/node (9) -
  • 8.32 set/obscount (9) -
  • 8.33 set/pinginterval (9) -
  • 8.34 set/privilege (9) -
  • 8.35 set/password (9) -
  • 8.36 set/sys_qra (9) -
  • 8.37 show program (5) -
  • 8.38 shutdown (5) -
  • 8.39 spoof (9) -
  • 8.40 stat/db (5) -
  • 8.41 stat/channel (5) -
  • 8.42 stat/msg (5) -
  • 8.43 stat/user (5) +
  • 8.16 load/baddx (9) +
  • 8.17 load/badmsg (9) +
  • 8.18 load/badwords (9) +
  • 8.19 load/bands (9) +
  • 8.20 load/cmd_cache (9) +
  • 8.21 load/forward (9) +
  • 8.22 load/messages (9) +
  • 8.23 load/prefixes (9) +
  • 8.24 merge (5) +
  • 8.25 msg (9) +
  • 8.26 pc (8) +
  • 8.27 ping (1) +
  • 8.28 rcmd (1) +
  • 8.29 read (5) +
  • 8.30 set/debug (9) +
  • 8.31 set/isolate (9) +
  • 8.32 set/sys_location (9) +
  • 8.33 set/lockout (9) +
  • 8.34 set/node (9) +
  • 8.35 set/obscount (9) +
  • 8.36 set/pinginterval (9) +
  • 8.37 set/privilege (9) +
  • 8.38 set/password (9) +
  • 8.39 set/sys_qra (9) +
  • 8.40 show program (5) +
  • 8.41 shutdown (5) +
  • 8.42 spoof (9) +
  • 8.43 stat/db (5) +
  • 8.44 stat/channel (5) +
  • 8.45 stat/msg (5) +
  • 8.46 stat/user (5)
    Next -- 2.43.0